Connecting the 3-Core Wire to Control Unit
This guide outlines how to properly connect the 3-Core Wire to your Oelo System Control Unit. This guide may be helpful during the installation stage, or for verifying your wiring connections.
Before continuing, make sure you have read the installation manual. It can be found here.
1. Insert the -GND 3-Core Wire to the Black Conductor. Clamp the Conductor down.
2. Insert the S 3-Core Wire to any SIG Port. Use a screwdriver to secure the wire in the Port.
3. Insert the +VCC 3-Core Wire to the Red Conductor. Clamp the Conductor down.
Note: Make sure there is no wiring left exposed when the Conductors are clamped down.